Thermal Roof Care Admixture

worker washing the roof with pressurized water

sealing-surface-precision-waterproofing-rooftop-concept-waterproofing-materials-roof-coatings-leak-prevention-surface-sealing-techniques

portrait-person-working-construction-industry

THERMO X-SEAL RF/XD

CODE: SIP/5125
HEAD : ROOF THERMAL PROTECTION

The Roof thermal protection coating is a synthetic resin based protective emulsion designed to reduce heat transfer through building roofs by reflecting solar radiation and minimizing heat absorption. THERMO X-SEAL RF/XD is multipurpose high quality thermal insulating formulated using acrylic & polyurethane binders combined with high-reflectance pigments such as titanium dioxide and with ceramic hollow microspheres that enhance thermal resistance. Once applied and cured, THERMO X-SEAL RF/XD forms a seamless, elastomeric protective membrane that provides high solar reflectance and high thermal resistance along with good elongation properties to accommodate structural movement and minor cracks. USES: THERMO X-SEAL RF/XD is widely used on concrete terraces, bituminous membranes, metal sheets and industrial shed roofs to reduce surface temperatures by up to 15–30°C which can lower indoor temperatures by 4–8°C in hot climates thereby lowering indoor temperatures and decreasing air-conditioning energy consumption. In addition to thermal insulation benefits, THERMO X-SEAL RF/XD coatings offer waterproofing, UV resistance, corrosion protection, and extended roof service life.

APPLICATION:The application of THERMO X-SEAL RF/XD is very simple on any surface. Before application, the roof / surface must be thoroughly cleaned to remove dust, oil, rust (on metal roofs), and any old flaking coatings with metal wire brush or any other suitable roughing medium. The Cracks and joints should be repaired using suitable sealants or patching compounds. The surface must be completely dry before applying the thermal coating of THERMO X-SEAL RF/XD using a brush, roller, or airless spray machine. It is typically applied in two coats to achieve the recommended dry film thickness (generally 200–500 microns). The second coat is applied perpendicular to the first after sufficient drying time (usually 4–6 hours, depending on weather conditions). The coating should not be applied during rain or high humidity, and curing is usually completed within 24–48 hours.

BENEFITS The major benefits of THERMO X-SEAL RF/XD are:

THERMO X-SEAL RF/XD forms a seamless, elastomeric protective coating that offers waterproofing and prevents water seepage.
THERMO X-SEAL RF/XD protects the roof from UV radiation, preventing premature aging, cracking, and corrosion, especially on metal roofs.
THERMO X-SEAL RF/XD coating extends roof service life, reduces maintenance costs, and improves indoor comfort.

Inquiry Now

DE-SCALANT AND ANTI- RUSTING

I.1) DESCALANT- CALCIUM / WHITE SCALE REMOVER

SHINO N Shield 2X-CRM —– (CALCIUM STAINS REMOVER)

HEAD: A CREAM DESCALANT & SHINNER BATHROOM FITTING

CODE:4201

SHINO N SHIELD 2X-CRM is a smooth cream type dual household descaler being a very powerful and very safe cleaning solution designed for everyday home use. SHINO N SHIELD 2X-CRM effectively removes tough limescale, mineral deposits, soap scum, and hard-water stains from bathroom & kitchen fixtures, water circulatory surfaces and tiles etc..SHINO N SHIELD 2X-CRM with a low-foam non-ionic surfactant lifts dirt and grime, while shinney micro-emulsion of formulation leaves taps, tiles, and fittings etc. with a smooth, water-repellent shine. SHINO N SHIELD 2X-CRM being a controlled acidic in nature, this descaler is strong on calcium and oil grim buildup yet safer on chrome, stainless steel, and most bathroom fixtures. Unlike other harsh & corrosive mineral acids such as hydrochloric acid, SHINO N SHIELD 2X-CRM is a milder acidic in nature with highly active surfactants with pleasant odour—making it very powerful cleaner for regular household descaling and maintenance specially against limescalse (CaCO₃)- a hard white deposited layer.

Some of the main features of SHINO N SHIELD 2X-CRM are:-

perfect for household 2-in-1 descaler + protector
Creamy texture so easy to apply with brush and cloths.
Clings vertical surfaces without dripping
Low odour, non-fuming (home-friendly)
Safer on chrome, & copper than hard acidic system such as HCL etc.
Widely used in bathroom fixtures, tiles, kettle, geyser, descalers

Application: The acidic creamy SHINO N SHIELD 2X-CRM is very easy to apply on vertical surface also. Just wet clean the surface and apply SHINO N SHIELD 2X-CRM with brush or cloth swab. Wait for 10 to 20 minutes. Slightly rub with nylon scrubber and wash the surface with water to have a shiny cleaned surface. Copper surface should always be rinsed with 10% baking soda solution to avoid post -oxidation after cleaning.

I.2) DERUST: RUST REMOVER

RUST-XON PROGEL—– (METAL RUST REMOVER)

CODE 4525

HEAD: RUST CLEANER

RUST-XON PROGEL 2 in 1: The domestic and industrial de-rusting gel is a thixotropic rust-removal formulation designed to adhere with vertical and irregular metal surfaces, allowing prolonged contact time for effective dissolution of iron oxides without excessive runoff. RUST-XON PROGEL is generally a two in one formulation which not only remove rust but also leaves a protective coating after removal of rust from the applied surface. RUST-XON PROGEL typically functions through a combination of organic or inorganic acids, phosphating additives, corrosion inhibitors, surfactants, chelating agents, and thickening systems with very high acidity with pH lower than 3. In general applications, the gel is used for removing rust from household tools, bathroom fittings, grills, gates, metal articles and mild steel items; it is applied by brush, left for 10–30 minutes depending on rust severity, then scrubbed lightly and rinsed with water, followed by drying and application of protective oil or paint. It is in industrial applications, RUST-XON PROGEL is used for machinery parts, pipelines, structural steel, storage tanks, automotive restoration and fabrication units where contact time may extend to 30–60 minutes, sometimes followed by pressure washing. Proper safety measures such as gloves, goggles etc. should be used while applying RUST-XON PROGEL with good ventilation. The neutralization of treated surface with alkaline solution after treatment is essential to prevent flash rusting.

APPLICATION: The use of RUST-XON PROGEL is simple to use on any surface as being gel texture in nature it very well adheres to the vertical surface without dripping. Just water clean the rusted surface and apply a thin coat off RUST-XON PROGEL and wait for 10 to 20 minutes for mild rust and for 30 to 60 minutes for heavy rusted articles. Just clean and scrub it with suitable medium and wash of the treated surface.

Wash the articles/ surface after de-rusting treatment with 10 % Washing soda to neutralize the surface for any flash rust.